Pump Lever

 

This option reduces pumping effort to a third.  It is approximately 48" long and produces a 10" stroke that the pump head is designed for.

​

It's laminated aluminum design uses a solid 3/8" Stainless Steel shoulder bolt and 1/2" steel hanger bolt as its central pivot point. The aluminum cap, fits onto 3/4" galvanized steel pipe and is held in place with a set screw.  The threads in the cap allow some vertical adjustment.  The eyebolt in the tip rides on a nylon bushing and connects directly to the pump rod coming out of the top of the pump head.

​

User supplies 3/4" galvanized steel pipe (usually 5ft) and one or two bags of premix concrete to create the pivot post that the pump lever screws onto.

​

​