Our AK pumps are ideal for shallow wells where the SWL is 0-40ft

Pick a length that is atleast 10ft longer than your SWL

Check out the demo video to the left

Scroll down for more info.  Enter length for final price.

SHALLOW AK 1.50" PUMPS

$201.00Price
  • If you have a shallow well where the static water is less than 40 ft, we can provide the best shallow well pump on the market. Our AK pump comes in 9 different models (9 different lengths) but all share our unique pump design which takes reliability to the insane levels. Our O-rings will never fail because we do not have any!

    The unique geometry of our pistons harnesses a property of water to create it’s own seal; the water sealed piston.  That’s right, the water seals the piston and creates a working pump that will outlast your well. If the piston is wet, it WILL pump water.  Water security now rides on an immutable property of water, not a 50 cent rubber O-ring.  No one else offers such a pump.

    Efficiency and reliability are competing goals in engineering a hand pump.  We manufacture emergency pumps, so we chose reliability as the most important feature.  The water doesn’t care that the pump is only 90% efficient and neither should the home owner, it delivers up to 4-6 gpm (depending on depth and rate of pumping).  This water sealed piston results in a pump that is ridiculously reliable and very easy to manufacture (no close tolerances).  A super reliable pump at a reasonable price point, the perfect combination of features for a Hand Operated Emergency Well Pump, and a “no brainer” for folks with shallow wells.

    Every wetted part of the pump is either Stainless Steel or PVC, so it is completely rust proof and will last for decades. Most people can install it in less than 60 minutes and the kit includes everything you need.  A Tee handle is standard for these pumps since the pumping effort for shallow wells is low.  The optional pump lever can be easily added later if pumping effort is an issue (figure on .9 lbs of effort per foot of lift).

    Pick a pump model that will be 10 ft longer (deeper) than your static water level.  The numbers of our models represent how long the assembled pump kits are and the only difference is how many 5ft Stainless Steel pump rods and 5ft drop pipe sections are included (one of each for every 5ft of depth). So, if your static water level is 23 ft, choose an AK 33 (6 X 5ft rods &  pipes ) 30ft of pipe and rod and a 3ft long pump will reach down 33 ft.

    Watch our demo video here to see this incredible pump

    working on a bridge where nothing can be faked.

  • This is a complete pump kit, no additional materials are needed. Kit includes;

     

    State of the art Pump with UV stabilized PVC Pumphead, Spigot (w discharge pipe threads) and Tee Handle.

     

    All the 5ft PVC Drop Pipes (w preglued threaded adapters), Stainless Steel Pump Rods (w SS hardware) and polypro safety rope needed for the depth selected. One Uppermost Blue Drop Pipe with predrilled weephole and Pumphead Adapter.

     

    Also included; Wonder Block (notched wooden block for installation), SS U-Bolt, SS Eyebolt, Rubber Grommet, Drop Pipe Handle, Pumphead Plug, Spigot Plug, 3/4 Tube Adapter. 

     

    Online video and printable pdf installation instructions.